PV Cable
Home   >   Products   >   Wind Cables
The power cable for generating unit by wind-driven

The power cable for generating unit by wind-driven

Share
    Item of technologyParameters of capability
    Uo/U Rated voltageAC. 0.6/1 kV
    Operating temperature for long term-40°C~70°C
    Permitted operating temperature for conductorWork at 90°C normally,at 250°C in short circuit(last 5 seconds longest)
    The lowest temperature for installation or laying-5°C
    Minimum bending radiusInstallation in Immobility:6x diameter
    Oil resist capabilityCan endure immersed oil test with IEC 60811-2-1 ( 100°C,168h )
    Flame retardant capabilityCan endure flame retardant test with IEC 60332-1
    Resist low temperatureCan endure low temperature test with GB/T 2951
    Jacket after air box hot aging testtensile strength ≥l0Mpa, rupture elongation rate≥250%
    Insulation cubage resistance rate at 90°Cp≥l012MΩ-cm
    Insulation resistance constant at 90°CK≥3.67MΩ-km
    Voltage testAC.3.5KV, 5min , Not puncture
    RoHS testAccording to RoHS European union                



    Specification, Resistance, over diameter,weight
    No.of cores x section(mm2)ConductorD.C.resistance at 20°C(Ω/km)Over diameter for reference(mm)Weight forreference(kg/km)
    1x950.20621.21233
    1x1200.16124.21566
    1x1500.12926.51908
    1x1850.10630.72415
    1x2400.080132.02952


    Be used in engine room of generating unit by wind-driven,rated voltage 0.6/1kV (690V) system,for fix up and laying power transmission line.

    Standard package per Wooden Drum, Or packed per roll.

Specification
Item of technologyParameters of capability
Uo/U Rated voltageAC. 0.6/1 kV
Operating temperature for long term-40°C~70°C
Permitted operating temperature for conductorWork at 90°C normally,at 250°C in short circuit(last 5 seconds longest)
The lowest temperature for installation or laying-5°C
Minimum bending radiusInstallation in Immobility:6x diameter
Oil resist capabilityCan endure immersed oil test with IEC 60811-2-1 ( 100°C,168h )
Flame retardant capabilityCan endure flame retardant test with IEC 60332-1
Resist low temperatureCan endure low temperature test with GB/T 2951
Jacket after air box hot aging testtensile strength ≥l0Mpa, rupture elongation rate≥250%
Insulation cubage resistance rate at 90°Cp≥l012MΩ-cm
Insulation resistance constant at 90°CK≥3.67MΩ-km
Voltage testAC.3.5KV, 5min , Not puncture
RoHS testAccording to RoHS European union                



Specification, Resistance, over diameter,weight
No.of cores x section(mm2)ConductorD.C.resistance at 20°C(Ω/km)Over diameter for reference(mm)Weight forreference(kg/km)
1x950.20621.21233
1x1200.16124.21566
1x1500.12926.51908
1x1850.10630.72415
1x2400.080132.02952


Application

Be used in engine room of generating unit by wind-driven,rated voltage 0.6/1kV (690V) system,for fix up and laying power transmission line.

Packing

Standard package per Wooden Drum, Or packed per roll.